Imported drop forged wire rope clips are most often used with heavy duty rigging applications to secure the wire rope on the turn back.
- Galvanized and drop forged
- Meets Federal Specifications: FF-C-450 Type 1 Class 1
- Refer to instructions below for proper use of wire rope clips
| Part # | Size (in) |
A (in) |
B (in) |
C (in) |
Min. # Clips |
Torque (lb/ft) |
RopeTurn Back (in) |
Wt per 100 Pcs (lb) |
| WRCDF18 | 1/8 | 1-5/16 | 13/16 | 1-5/16 | 2 | 4.50 | 3.25 | 5 |
| WRCDF316 | 3/16 | 1-7/32 | 15/16 | 1-5/32 | 2 | 7.50 | 3.75 | 9 |
| WRCDF14 | 1/4 | 1-11/32 | 1-3/16 | 1-7/16 | 2 | 15 | 4.75 | 18 |
| WRCDF516 | 5/16 | 1-3/4 | 1-5/16 | 1-11/16 | 2 | 30 | 5.25 | 30 |
| WRCDF38 | 3/8 | 1-15/16 | 1-5/8 | 1-15/16 | 2 | 45 | 6.50 | 42 |
| WRCDF716 | 7/16 | 2-3/8 | 1-13/16 | 2-9/32 | 2 | 65 | 7 | 70 |
| WRCDF12 | 1/2 | 2-3/8 | 1-29/32 | 2-9/32 | 3 | 65 | 11.50 | 75 |
| WRCDF916 | 9/16 | 2-13/16 | 2-1/16 | 2-1/2 | 3 | 95 | 12 | 100 |
| WRCDF58 | 5/8 | 2-15/16 | 2-1/16 | 2-1/2 | 3 | 95 | 12 | 100 |
| WRCDF34 | 3/4 | 3-3/8 | 2-1/4 | 2-27/32 | 4 | 130 | 18 | 150 |
| WRCDF78 | 7/8 | 3-7/8 | 2-7/16 | 3-5/32 | 4 | 225 | 19 | 240 |
| WRCDF1 | 1 | 4-1/4 | 2-5/8 | 3-15/32 | 5 | 225 | 26 | 250 |
| WRCDF118 | 1-1/8 | 4-5/8 | 2-13/16 | 3-19/32 | 6 | 225 | 34 | 310 |
| WRCDF114 | 1-1/4 | 5-1/8 | 3-1/8 | 4-1/8 | 7 | 360 | 44 | 460 |
| WRCDF138 | 1-3/8 | 5-1/2 | 3-1/8 | 4-3/16 | 7 | 360 | 44 | 520 |
| WRCDF112 | 1-1/2 | 5-13/16 | 3-13/32 | 4-7/16 | 8 | 360 | 54 | 590 |
| WRCDF158 | 1-5/8 | 6-5/16 | 3-5/8 | 4-3/4 | 8 | 430 | 58 | 730 |
| WRCDF134 | 1-3/4 | 6-7/8 | 3-13/16 | 5-9/32 | 8 | 590 | 61 | 980 |
| WRCDF2 | 2 | 7-11/16 | 4-7/16 | 5-7/8 | 8 | 750 | 71 | 1,340 |
| WRCDF214 | 2-1/4 | 8-3/8 | 4-9/16 | 6-3/8 | 8 | 750 | 73 | 1,570 |
| WRCDF212 | 2-1/2 | 8-15/16 | 4-11/16 | 6-5/8 | 9 | 750 | 84 | 1,790 |
| WRCDF234 | 2-3/4 | 9-9/16 | 5 | 6-7/8 | 10 | 750 | 100 | 2,200 |
| WRCDF3 | 3 | 10-11/16 | 5-5/16 | 7-5/8 | 10 | 1,200 | 106 | 3,200 |
| WRCDF312 | 3-1/2 | 12-1/4 | 6-3/16 | 8-3/8 | 12 | 1,200 | 149 | 4,000 |
Proper Use of Drop Forged Wire Rope Clips
- The correct way to attach wire rope clips is illustrated above. Apply the first clip one base width from the dead end of the wire rope. The base or saddle should bear on the line end of the rope – U-bolt on the short end. Tighten nuts firmly.
- Attach second clip as close to loop as possible. Tighten nuts but not firmly.
- Attach balance of clips spaced equally between first two clips. Tighten all nuts completely. Apply initial load – inspect nuts and retighten. Inspect all clips periodically.
