These are drop forged eye bolts with a shoulder and nut, they are significantly stronger than eye bolts with wire eyes. The large shoulder eliminates the need for a washer under the eye. For angular lifting and loading, a shoulder eye bolt should be used as the shoulder helps maintain the strength of the eye and the shank from bending or deforming. A straight vertical in-line lift would be 90°. If the angle of the sling to the load drops to 45°, the eye bolt will be at 30% of its rated capacity. If the angle drops to 0°, the lifting eye bolt’s capacity will be diminished to 25% of rated capacity.
- Drop forged & hot dip galvanized
- Permanently marked with size
- Imported
Part # |
A Size (in) |
B (in) |
C (in) |
D (in) |
E (in) |
WLL (lbs) |
Wt (lb) |
EBGS142 |
1/4 |
1.50 |
2.00 |
0.50 |
1.00 |
500 |
0.06 |
EBGS144 |
1/4 |
2.50 |
4.00 |
0.50 |
1.00 |
500 |
0.10 |
EBGS516214 |
5/16 |
1.25 |
2.25 |
0.63 |
1.25 |
800 |
0.12 |
EBGS516212 |
5/16 |
1.50 |
2.50 |
0.63 |
1.25 |
800 |
0.13 |
EBGS516414 |
5/16 |
2.50 |
4.25 |
0.63 |
1.25 |
800 |
0.17 |
EBGS38212CW |
3/8 |
1.50 |
2.50 |
0.75 |
1.50 |
1,200 |
0.22 |
EBGS38414 |
3/8 |
2.25 |
4.25 |
0.75 |
1.50 |
1,200 |
0.26 |
EBGS38412 |
3/8 |
2.50 |
4.50 |
0.75 |
1.50 |
1,200 |
0.28 |
EBGS122 |
1/2 |
1.50 |
2.00 |
1.00 |
2.00 |
2,200 |
0.46 |
EBGS12314 |
1/2 |
1.50 |
3.25 |
1.00 |
2.00 |
2,200 |
0.54 |
EBGS126 |
1/2 |
3.00 |
6.00 |
1.00 |
2.00 |
2,200 |
0.68 |
EBGS1210 |
1/2 |
3.00 |
10.00 |
1.00 |
2.00 |
2,200 |
0.93 |
EBGS584 |
5/8 |
2.00 |
4.00 |
1.25 |
2.50 |
3,500 |
1.00 |
EBGS586 |
5/8 |
3.00 |
6.00 |
1.25 |
2.50 |
3,500 |
1.14 |
EBGS5810 |
5/8 |
3.00 |
10.00 |
1.25 |
2.50 |
3,500 |
1.55 |
EBGS5812 |
5/8 |
4.00 |
12.00 |
1.25 |
2.50 |
3,500 |
1.69 |
EBGS34412 |
3/4 |
2.00 |
4.50 |
1.50 |
3.00 |
5,200 |
1.64 |
EBGS346 |
3/4 |
3.00 |
6.00 |
1.50 |
3.00 |
5,200 |
1.81 |
EBGS3418 |
3/4 |
– |
18.00 |
1.50 |
3.00 |
5,200 |
– |
EBGS16 |
1 |
3.00 |
6.00 |
2.00 |
4.00 |
10,000 |
3.60 |
EBGS19 |
1 |
4.00 |
9.00 |
2.00 |
4.00 |
10,000 |
4.30 |