These Multi-Leg Bridle assemblies are ideal for loads equipped with permanent lifting attachments. They’re lightweight, easy to use and economical. Choose from Scuff-Edge®, nylon or polyester. Choose from P (pear-shaped) or O (oblong) links for bridles. Hoist hooks and shackles are options on sling legs as well.
Polyester webbing standard unless otherwise requested. Available in tow, three or four leg configurations.
1 – Choose the Stock Number
Choose the stock number you’ll need for your application from the chart.
2 – Choose the Attachment
Each end attachment is represented by the code letters shown above. Insert these letters as a prefix for your stock number in this sequence:
Link attachment: P (pear-shaped) or O (oblong) link.
Number of legs: 2, 3, or 4
End attachment: SH (hook with latch), E (sewn eye), P (pear-shaped), SS (shackle) or O (oblong). For each leg you need, use a letter to designate the end attachment.
For example, an “O3E” is a three-leg assembly with an alloy oblong (O) link as leg attachment and sewn eyes (E) as the end attachments for each of the three legs.
3 – Choose the Length
Choose the length you’ll need, and add it at the end of the stock number.
Example: A P2SH-1-902 x 10’ is what to order when you need:
A pear-shaped (P) link for the leg attachment.
A hook with latch (SH) on each of the two legs for the end attachment.
A “-1-902” stock number representing a two-inch wide, one-ply sling.
A “10-ft.” designation when you need a bridle 10 feet long
