The Energy Absorbing Single Leg Lanyard from Gemtor’s new TB Series of Tie-Back Lanyards and has 1-3/16″ wide dual layer polyester webbing. It features an integral locking snaphook which is supplied for attachment to your full-body harness and a captive automatic locking carabiner that is fitted at the opposite end for attaching to a suitable anchor. It is specifically designed so that the webbing may be wrapped around an OSHA compliant structural support and the automatic locking carabiner can be “snapped” back on to the lanyard. The black inner layer is made of high strength polyester webbing, the yellow outer layer offers additional strength, and helps protect the inner layer from abrasion and cutting. The contrasting colors help the user identify when the lanyard is severely worn. Meets OSHA, ANSI standards.
OSHA mandates that the fall arrest forces on a worker not exceed 1,800 lbs. when wearing a full-body harness. Gemtor, Inc. recommends that an energy/shock absorber be used whenever the possibility of a free fall exists to assure that forces are below the OSHA limits. Energy absorbers can increase fall arrest distance by up to 42”. Make sure the available fall space permits the use of an energy absorber.
- Dual layer, dual color design
- Cut resistant tubular webbing
- Contrasting layer colors
- Captive self-locking carabiner for direct connection to anchorage
- Locking snaphook
- Solid link D-Ring on 100% tie-off models
- Meets OSHA & ANSI standards
| Part # | Length (ft) |
Wt (lb) |
| GEMTB1101L4 | 4 | 2.25 |
| GEMTB1101L6 | 6 | 2.25 |
| GEMTB1101L10 | 10 | 2.50 |
